Large-Format Porcelain & Sintered Stone Fabrication
For large-format boxed cladding, reception counters and worktops with fixture openings.
- Materials
- Large-format porcelain and sintered stone, supported through loading, cutting and transfer.
- Process
- Size large panels on the Sawjet, cut specified openings and bevel eligible straight mating edges.
Recommended setup
Setup 01 matches the workshop image above. Compare other setups for different parts or processes.
Setup 01
3220 Sawjet + belt-feed beveler
Use the Sawjet for straight cuts and specified through-cut details. Bevel eligible straight edges separately when the drawing calls for a mating joint.
Workflow
- Support and size the panel
- Waterjet specified openings or contours
- Bevel eligible mating edges and dry-fit
-
3220 5-Axis CNC Sawjet
Size panels with the saw and use the waterjet for specified contours or internal corners.
- Output
- Sized panels with through-cut details.
- Overall size
- 5800 × 4800 × 3850 mm
-
Belt-Feed Sintered-Stone Beveler
Bevel eligible straight edges of supported sintered-stone boards in a belt-feed pass.
- Output
- Straight beveled edges for trial assembly.
- Overall size
- 4000 × 1500 × 1622 mm
Compare other setups
Setup 02
Double-blade bridge saw + rail-type beveler
For straight panels and long joints that need a separately checked mating face.
Workflow
- Support and size panels
- Prepare long 45° faces
- Dry-fit matching panels
-
Three-Axis Double-Blade CNC Bridge Saw
Size panels using a blade pair selected for the material.
- Output
- Sized panels with a marked reference edge.
- Overall size
- 4800 × 3050 × 2400 mm
-
3200 Precision 45° Beveling Machine
Machine long straight 45° mating faces on supported panels.
- Output
- Protected bevel faces for dry fitting.
- Overall size
- 5000 × 1450 × 1500 mm
Finished parts in use
Compare long mitred joints, a full-height counter return and a through-cut fixture opening. Applications are shown for illustration.
Full-height panels and mitred returns
-
Long mating edge Check the visible face remainder over the entire joint. -
Boxed column cladding Dry-fit adjacent faces and check the end alignment before fitting the column. -
Porcelain wall panels in a showroom Lay out the numbered panels in order and compare the vertical joints, shade and grain direction. -
Porcelain panels around a lift Dry-lay the head and jamb pieces together and check that the visible joints line up with the frame.
Fixture openings and fitted counters
-
Through-cut fixture opening Inspect the cut face and narrow bridges. Specify a separate rim finish if required. -
Fitted top with a sink opening Check fixture clearance and support around the cutout and the end return. -
Full-height counter mitre Dry-fit the top and end. Check the joint gap and the remaining visible face material. -
Fitted reception counter Check the front and end alignment before fixing the return in place.
Check the fit for your workshop
Check your drawings against machine limits, then plan how slabs and finished parts will move through the workshop.
Part requirements
Mark the panel datum, visible face and edges that need a mating bevel. Verify the Sawjet’s cutting area and qualify the straight joint and opening on the actual slab.
Largest panel
Record the full slab size, thickness and any supported overhang.
Long visible joint
Mark the two mating faces and the agreed face remainder.
Openings and contours
Show internal corners, narrow sections and surfaces requiring separate finishing.
Single-machine operations and model details
Machine details3220 5-Axis CNC Sawjet
- Functions
- Size panels with the saw and use the waterjet for specified contours or internal corners.
- Core configuration
- 15 kW saw spindle, five-axis waterjet and an independent milling spindle. Specified cutting size is 3200 × 2000 mm.
Machine detailsBelt-Feed Sintered-Stone Beveler
- Functions
- Bevel eligible straight edges of supported sintered-stone boards in a belt-feed pass.
- Core configuration
- Belt-feed configuration. Catalogue minimum board width is 50 mm and maximum thickness is 20 mm.
Machine detailsThree-Axis Double-Blade CNC Bridge Saw
- Functions
- Size panels using a blade pair selected for the material.
- Core configuration
- Three-axis CNC movement and double-blade cutting head. Qualify blade setup and visible-edge quality on the actual slab.
Machine details3200 Precision 45° Beveling Machine
- Functions
- Machine long straight 45° mating faces on supported panels.
- Core configuration
- Rail-type 3200 model. Catalogue thickness is 5.5–30 mm. Verify support over the entire part and remaining face material.
Workshop layout and handling
The estimate adds the footprints of the machines in Setup 01. Allow extra room for loading, aisles, servicing and auxiliary equipment. Confirm the installed layout for your site.
- Loading and turn space
- Plan the transfer path using the largest slab on its handling gear.
- Long-edge support
- Reserve infeed, outfeed and a flat bench for full-length dry fits.
- Services and access
- Confirm water, drainage, auxiliary equipment and service clearances on the chosen layout.

Technical answers
Before you order
Review machine fit and sample checks, then see what to send for an equipment quote.
Discuss your setupWhich details use the Sawjet?
Use the saw for straight sizing. Qualify waterjet through-cuts where the drawing calls for an opening or contour, especially near a narrow bridge.
Will my panels fit the belt-feed beveler?
Check the straight edge and support over the full panel. The catalogue lists a 50 mm minimum board width and a 20 mm maximum thickness. Approve the actual joint on a trial pair.
What should I record from the trial?
Cut the most demanding opening and dry-fit the longest mating pair. Inspect the cut face at narrow sections and check that the visible face remainder is consistent. See the finished-part checks.
What do you need for a quote?
Send the largest slab size, thickness and material, the opening and corner drawings, the longest joint and expected volumes by operation.