Skip to main content

Compact Tile Workshops for Fit-Out

For replacements cut to site measurements, paired corners and tile kits sorted by room.

Materials
Compatible ceramic and porcelain tile within the selected cutter’s working range.
Process
Size and label replacements. Dry-fit matching mitres and check the visible joint.
See equipment setup
Illustrative workshop layout for Setup 01: 1800 Multifunction Twin-Blade Cutter
1 machine · Est. 6 m² footprint · Actual area may vary

Recommended setup

Setup 01 matches the workshop image above. Compare other setups for different parts or processes.

Setup 01

1800 hand-push multifunction twin-blade cutter

Use the hand-push cutter for measured replacements and specified corner cuts within the tool and tile limits.

Workflow

  1. Measure and label from the site datum
  2. Size tiles and trial specified corner cuts
  3. Dry-fit and sort parts by room
  • 1800 Multifunction Twin-Blade Cutter

    Size tiles and prepare compatible mitred corner cuts after qualifying the tooling and tile.

    Output
    Measured replacements and labeled room-kit pieces.
    Overall size
    3300 × 1900 × 1700 mm
Compare other setups

Setup 02

Multifunction cutter + dedicated corner station

For recurring mitred returns where a separate station helps control the corner operation.

Workflow

  1. Prepare and sort blanks
  2. Cut both mating edges
  3. Dry-fit full corner kits
  • 1800 Multifunction Twin-Blade Cutter

    Size tiles and prepare compatible mitred corner cuts after qualifying the tooling and tile.

    Output
    Measured replacements and labeled room-kit pieces.
    Overall size
    3300 × 1900 × 1700 mm
  • 1800 45° Tile Corner Machine

    Cut complementary 45° faces for inside or outside corner assemblies.

    Output
    Matched tile pieces for dry fitting.
    Overall size
    2200 × 1500 × 1600 mm

Setup 03

Three-blade cutter + corner station

For repeat-size runs that justify dedicated batch cutting and corner equipment.

Workflow

  1. Set repeated cut sizes
  2. Prepare corners separately
  3. Check, label and pack kits
  • 1800 Three-Blade Ceramic Tile Cutter

    Cut ceramic tile to repeated sizes with the selected blade positions.

    Output
    Repeat-size tile strips and blanks.
    Overall size
    2800 × 2300 × 1750 mm
  • 1800 45° Tile Corner Machine

    Cut complementary 45° faces for inside or outside corner assemblies.

    Output
    Matched tile pieces for dry fitting.
    Overall size
    2200 × 1500 × 1600 mm

Check replacements against the retained finish, then dry-fit corner pairs and a complete kit for the room. Applications are shown for illustration.

Check the fit for your workshop

Check your drawings against machine limits, then plan how slabs and finished parts will move through the workshop.

Part requirements

Use the retained joint as the measuring datum and mark the visible face and room ID. Keep each replacement and its mating corner together through dry fitting.

Site measurements

Record joint allowances and the retained reference edge in the room.

Exposed finish

Choose the visible edge, check glaze and mark both faces before cutting.

Room kit

Group parts by room, sequence and corner orientation so replacement pieces stay traceable.

Single-machine operations and model details
1800 Multifunction Twin-Blade CutterMachine details

1800 Multifunction Twin-Blade Cutter

Functions
Size tiles and prepare compatible mitred corner cuts after qualifying the tooling and tile.
Core configuration
Hand-push twin-blade unit with one swivel and one fixed head. Catalogue cutting range is 1800 × 900 mm at 6–20 mm thickness.
1800 45° Tile Corner MachineMachine details

1800 45° Tile Corner Machine

Functions
Cut complementary 45° faces for inside or outside corner assemblies.
Core configuration
Dedicated 45° corner station. Verify support, chipping and the visible face remainder on the minimum strip.
1800 Three-Blade Ceramic Tile CutterMachine details

1800 Three-Blade Ceramic Tile Cutter

Functions
Cut ceramic tile to repeated sizes with the selected blade positions.
Core configuration
Three-blade CNC cutting configuration. Check feed and handling for the actual tile format.
Workshop layout and handling

The estimate adds the footprints of the machines in Setup 01. Allow extra room for loading, aisles, servicing and auxiliary equipment. Confirm the installed layout for your site.

Transport and loading
Check the route for the largest tile and provide stable feed support.
Wet services
Confirm water, power and drainage at the proposed cutting location.
Dry staging
Keep the dry-fit area and finished room kits away from cutting slurry.
Open workshop floor with slab racks along the back wall.

Technical answers

Before you order

Review machine fit and sample checks, then see what to send for an equipment quote.

Discuss your setup
What can the hand-push cutter handle?

Check the actual tile and tooling against the 1800 × 900 mm cutting range and 6–20 mm catalogue thickness. Trial the specified corner on the same tile as the job.

When is a separate corner station worthwhile?

Compare it when mitred returns are frequent enough to interrupt sizing. Approve a full pair and allow room for loading and turning the largest tile.

What should I record from the trial?

Fit a replacement to the retained tile and dry-fit a complete mitred pair. Record joint width, glaze condition and face alignment. See the finished-part checks.

What do you need for a quote?

Send your largest tile size, thickness and finish, the required cut and corner details, batches by room and the space, power and water available.

Talk to HoYun

Discuss your equipment needs

Tell us what you make. Include the material, workpiece dimensions, required processes and target output. Add the model if you have a machine in mind.

Explore all machines

Sales enquiries

Connect on WeChat

Scan this code in WeChat or add our sales number. On your phone, save the code to scan from your photos.

HoYun sales WeChat QR code

+86 156 2720 7763

Save QR code

Sales enquiries

Talk to HoYun

Connecting to live chat…

You can also reach our sales team directly.

WhatsApp +86 156 2720 7763Jessie@hoyunmachinery.com